RA SystemsOperating SystemsUltrasonic ScalersCompressorsSuctionIntra-Oral CameraCuring LightsAutoclavesHandpiecesX-Rays

Dry Suction Equipment > Air Water Separation

METASYS LOGOMetasys Air Water Separation
with Amalgam Retention

Multi system suction

The METASYS Multisystem Type 1 is a two-stage chair side amalgam separator with integrated air/water separation and place selection valve. Equipped with the technical know-how of years of practical experience, there are convincing arguments in favour of the Multisystem Type 1 amalgam separator.

Thanks to its modular construction and 98.6% separation rate efficiency (in accordance with the German DIN standard) - achieved by pre-sedimentation and dynamic separation - it is a milestone for modern dental technology in the service of the environment. The cost of maintenance is reduced to a minimum as as result of the integrated self-cleaning function.

The Advantages of the MultiSystem Type 1 are:

  • Optimum static air/water separation
  • Integrated place selection valve
  • Directly connected to the spittoon
  • Tried and tested technology, with experience of operating over 150,000 built-in devices
  • Easy to service due to modular construction
  • Suitable for both wet and dry suction systems

 

Technical Details

MultiSystem Type 1

 

Technical Data:

Power Supply: 24V AC
Frequency: 50/60Hz
Max. Current Consumption: 2 A
Max. Power Input: 46 VA
Separation Rate: 98,6%
Vacuum Range: 50mbar -250mbar
Storage Container Change-Over Interval: 7-9 months
Potential Suction Systems: wet-/dry suction
Max. Water Flow Volume: 4,5 l/min
DIBT Permit Number: Z-64.1-4

METASYS Air Water Separation
ECO

Multisystem Eco suction

The METASYS Multisystem Type 1 - ECO is an automatic single unit air/water separator with an integrated heavy particle collector and a place selection valve.

The Advantages of the MultiSystem Type 1 - ECO are:

  • Upgrade option: the MST1 - Eco automatic separator can be upgraded to the MST 1 amalgam separator with minimum effort.
  • Integrated heavy particle collector: coarse particles are separated off in the sump, protecting the hoses and pipes further down the system from deposits of heavy particles.
  • Simple to Retrofit: with a large number of retrofit sets for specific equipment, it is a quick and easy matter to install the machine in existing treatment units. All the retrofit sets for the MST 1 amalgam separator can also be used for the MST 1 -Eco automatic separator.
  • High degree of service-friendliness: if servicing or maintenance is necessary, the modular construction of the MST1 - ECO guarantees that the exchange of parts will be quick and easy.
  • Add-on housing: if it is not possible to build the MAST 1 -ECO directly into the treatment unit for technical reasons, it may also be set up in the well-designed add-on housing.

 

MultiSystem Type 1 - ECO

 

Technical Data:

Power Supply: 24V AC
Frequency: 50/60Hz
Max. Current Consumption: 0,6 A
Max. Power Loading: 15 VA
Low Pressure Range: 50mbar -250mbar
Possible Suction Systems: wet-/dry low pressure
Max. Ambient Temp: 40°C
Total Dimensions (mm): 305X165X104